Product Details:
Size | 18INCH |
Brand | Jindal |
Material | WELDED PIPE IS2062 |
Thickness | 6.35mm to 15mm |
Surface Treatment | black painted |
Type | Welded |
Unit Pipe Length | 6 meter, 3 meter, Standard, 9 meter |
Shape | Round |
Country of Origin | Made in India |
Additional Information:
Product Details:
Material Grade | AISI 4130 Seamless Steel Pipes for Car Manufacturing |
Nominal Size | 1/8 NB to 24 NB |
Outer Diameter | 1/8 NB to 24 NB |
Wall Thickness | Schedule 40 to Schedule XXS |
Material | A519 AISI 4130, 4135,4140,4145,4150 |
Unit Pipe Length | 6 meter |
Additional Information:
Product Details:
Size | 1/8 NB to 36 NB |
Brand | JINDAL,MSL, ISMT, SAIL,APOLLO, IMPORTED & OTHER |
Material | ASTM A519 4140/AISI 4130,4135,4140,4150 |
Thickness | Schedule 40 to Schedule XXS |
Surface Treatment | standard |
Type | Seamless & Welded |
Unit Pipe Length | 6 meter |
Shape | Round |
Chemical Composition Limits, % ASTM A519 Gr 4140 Seamless Pipes | |||||||||||
Grade Designation | Carbon | Manganese | Phosphorus,max | Sulfur, max | Silicon | Nickel | Chromium | Molybdenum | |||
4140 | 0. 28-0. 33 | 0. 40-0. 60 | 0. 04 | 0. 04 | 0. 15-0. 35 | - | 0. 80-1. 10 | 0. 15-0. 25 |
Tensile Properties ASTM A519 Gr 4140 Seamless Pipes | ||||||||
Grade Designation | Condition | Ultimate Strength | Yield Strength | Elongation in 2 in. or 50mm,% | Rockwell, Hardness B Scale | |||
KSI | MPA | KSI | MPA | |||||
4140 | hr | 90 | 621 | 70 | 483 | 20 | 89 | |
sr | 105 | 724 | 85 | 586 | 10 | 95 | ||
a | 75 | 517 | 55 | 379 | 30 | 81 | ||
n | 90 | 621 | 60 | 414 | 20 | 89 |
We are Authorized Dealer for Seamless and ERW pipe and Tube.
ERW / Seamless /EFW / PIPE / TUBE / CARBON / ALLOY / MS / CS / AS /MILD STEEL / CARBON STEEL / ALLOY STEEL / AUTHORISED DEALER / STOCKIEST / SUPPLIER / MANUFACTURER / MS PIPE / STOCK / CS PIPE / AS PIPE / DRILL PIPE / MECHANICAL COMPOSITION / CHEMICAL COMPOSITION / CHEMICAL COMPOSITION / STOCKHOLDER / HEAVY WALL THICKNESS PIPES / JINDAL / MSL / ISMT / INDIAN MAKE / STEEL PIPE / PQF MILL / SEAMLESS PIPE MILL / SR L LENGTH / DRL LENGTH PIPE / IBR APPROVED / NACE MR 10175 / NACE MR 0103 / SOUR SERVICE / HSC TESTED / CHROME MOLY PIPE / HIGH PRESSURE PIPE / BOILER TUBE / SURPLUS PIPE / API PIPE / ASTM /BS /JIS / NACE / EN GRADE / BEARING PIPE / MUMBAI / NAVI MUMBAI / KALAMBOLI WAREHOUSE / TALOJA / INDIA
We are Authorized Dealer / Stockiest / Supplier for SA 335 P91 With Stock of Around 5000 Ton, We are Largest Stock holder for SA 335 P91 We supply Material with TC , which contain Mechanical and Chemical Properties , with Hydro Pressure. DRL and SRL length can be supplied for SA 335 P91 We Stock from 1/2" to 16"NB All SCH / Class SA 335 P91 Keyword-Supplier / Stockiest / Manufacturer / Stockiest / Authorised Dealer MS Pipe / ISMT / Jindal / JSL / MSL / Indian make / Alloy Steel / Mild Steel / Carbon Steel / ERW / Welded / Seamless / Drill Pipe / Chrome Pipe / High Pressure Pipe / HIC / Sour Service / IBR / Boom Pipe / Nace MR 0175 0103 / PQF Mill / Seamless Pipe / Alloy Steel Seamless Pipe.
AUTHORISED STOCKISTS OF:
· Maharashtra Seamless Ltd. ASTM A519 Gr 4140 Seamless Pipes
Products of Tubes/ MSERW Pipes
· Jindal Saw Ltd. ASTM A519 Gr 4140 Seamless Pipes
Products of Carbon Alloy steel pipe & Tube.
· Jindal India Ltd. ASTM A519 Gr 4140 Seamless Pipes
Products of M.S./ G.I. ERW Pipes & Tubes
Additional Information:
Product Details:
Product Type | SA 333 GRADE 6 |
Outside Diameter | 1/8 NB to 24 NB |
Wall Thickness | Schedule 40 to Schedule XXS |
Nominal Pipe Size | Standard |
Material Grade | SA 333 GRADE 6 |
Usage/Application | Industrial |
Material | Alloy steel |
Country of Origin | Made in India |
We are also bulk Stockists, Supplier & Exporters of SA 333 Grade 6 Impact Tested Pipe. We have around 2000 Ton Material in Stock in Different Grades & Sizes. A333 Gr 6 Material Pipe. We have gained vast expertise in offering a superior range of Carbon Steel Pipes & Tubes to our clients. Our ranges of products include carbon steel tubes, carbon steel pipes, LSAW Pipe, Saw Pipe, Spiral Pipe. These are used for building construction and industries like oil, petrochemical, refinery and many more. We offer these in different dimensions, shapes, sizes, material specifications as per clients own requirement. These can be purchased at reasonable prices. A333 Gr 6 Material Pipe.
ASTM A333 Standard covers seamless and welded steel pipe for low-temperature service. The Grade 6 steel involved is similar to AISI 4032 low alloy steel. ASTM A333 Grade 6 pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation.
Forging:
Product is supplied in pipe form and not normally forged from that shape
Machinability:
Machinability is good, similar to law alloy 4032 steel
Forming:
The product comes in piping form but may be formed readily by conventional methods
Welding:
Weldable by conventional methods
Cold Working:
Cold working may be done by conventional methods
Annealing:
Anneal, or normalize, at 1600 F and air cool
Heat Treatment:
·The product is supplied in the normalized, 1500 f and air cooled, condition.
·It may be quenched and tempered by heating to 1475 F, quench in circulating water and then temper by re-heating to 1100 F and rapid air cooling
Hot Working:
·Hot working may be done qt 2000 F down to 1600 F if need be
·Do not hot work below 1550 F and immediately following hot working cool in a controlled atmosphere furnace from a temperature above 1550 F
Inspection and Test:
·Chemical Composition Inspection, Mechanical Properties Test
·Tensile Strength, Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test
·Surface and Dimension Test, No-destructive Test, Hydrostatic Test
Packing:
·Packed in wooden crates, wrapped in plastic, and suitably protected for sea-worthy delivery or as requested.
·Both ends of each crate will indicate the order no., heat no., dimensions, weight, and bundles or as requested.
Delivery:
·Pipes are supplied in hexagonal bundles or round bundles tied with steel strip.
·Weight of bundle – up to 5000 kg upon request of the customer.
·Each bundle is furnished with three tags.
Additional Information:
Product Details:
Material | Alloy Steel |
Usage/Application | Chemical Handling |
Grade | A333,A335,SA519 |
Size/Diameter | 1/8 NB to 24 NB |
Length | Standard, 4-6 meters |
Size | 1/8 NB to 24 NB |
Type | Seamless |
Hollow Sections | Circular |
Finishing | Painted, Polished, Powder Coated |
We are also bulk Stockists, Supplier & Exporters of A333 Gr 6 Pipe. We have around 2000 Ton Material in Stock in Different Grades & Sizes. A333 Gr 6 Material Pipe. We have gained vast expertise in offering a superior range of Carbon Steel Pipes & Tubes to our clients. Our ranges of products include carbon steel tubes, carbon steel pipes, LSAW Pipe, Saw Pipe, Spiral Pipe. These are used for building construction and industries like oil, petrochemical, refinery and many more. We offer these in different dimensions, shapes, sizes, material specifications as per clients own requirement. These can be purchased at reasonable prices. A333 Gr 6 Material Pipe. A333 Gr 6 Material Pipe
ASTM A333 Standard covers seamless and welded steel pipe for low-temperature service. The Grade 6 steel involved is similar to AISI 4032 low alloy steel. ASTM A333 Grade 6 pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation
Forging:
Product is supplied in pipe form and not normally forged from that shape
Machinability:
Machinability is good, similar to law alloy 4032 steel
Forming:
The product comes in piping form but may be formed readily by conventional methods
Welding:
Weldable by conventional methods
Cold Working:
Cold working may be done by conventional methods
Annealing:
Anneal, or normalize, at 1600 F and air cool
Heat Treatment:
The product is supplied in the normalized, 1500 f and air cooled, condition.
It may be quenched and tempered by heating to 1475 F, quench in circulating water and then temper by re-heating to 1100 F and rapid air cooling
Hot Working:
Hot working may be done qt 2000 F down to 1600 F if need be
Do not hot work below 1550 F and immediately following hot working cool in a controlled atmosphere furnace from a temperature above 1550 F
Inspection and Test:
Chemical Composition Inspection, Mechanical Properties Test
Tensile Strength, Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test
Surface and Dimension Test, No-destructive Test, Hydrostatic Test
Packing:
Packed in wooden crates, wrapped in plastic, and suitably protected for sea-worthy delivery or as requested.
Both ends of each crate will indicate the order no., heat no., dimensions, weight, and bundles or as requested.
Delivery:
Pipes are supplied in hexagonal bundles or round bundles tied with steel strip.
Weight of bundle – up to 5000 kg upon request of the customer.
Each bundle is furnished with three tags.
Additional Information:
Product Details:
Minimum Order Quantity | 1000 Kg |
Material | Carbon Steel |
Brand | JINDAL,MSL, ISMT, SAIL,APOLLO, IMPORTED & OTHER |
Usage/Application | Industrial |
Type | AISI SA333 Gr.6 Seamless Steel Pipe |
Material Grade | AISI SA333 Gr.6 Seamless Steel Pipe |
Thickness | Schedule 5S to Schedule XXS |
Surface Finish | Anodized, Finished Polished, Mill Finished |
Size | 1/8 NB to 24 NB |
Additional Information:
Additional Information: